Radius Vextor Zero Torque Putter

Designed to reduce unwanted face rotation.

Small changes in face angle can have a significant effect on a putt's starting direction.

Traditional putter designs can create torque around the shaft axis, encouraging the head to rotate during the stroke. The golfer then has to manage that rotation and return the face to the intended position at impact.

Vextor is engineered differently.

Its Zero Torque geometry aligns the shaft axis with the centre of gravity of the putter head, reducing the twisting force that wants to rotate the face.

This creates Vextor's distinctive toe-up balance characteristics and allows the head to remain naturally more stable throughout the stroke.

The potential benefit is simple: less unwanted rotation and less need for the hands to manipulate the face.

The golfer can concentrate on line and pace — and allow the putter to move.

Mass positioned with purpose.

Vextor's distinctive sole weights aren't there simply for appearance.

Strategically positioned towards the front of the head, the weighting concentrates mass closer to the face and forms an important part of Vextor's overall CG architecture.

The Forward CG positioning works together with the location and angle of the shaft to create Vextor's toe-up, low-torque balance characteristics.

It also allows Vextor to combine the substantial footprint and confidence of a modern mallet with the CG and shaft relationship required by its Zero Torque design.

Every gram has a purpose.

Control doesn't stop at the putter face.

Zero Torque technology is designed to control what the putter head does.

Radius Ball Face Technology (BFT) takes the next step by addressing what happens when that face actually meets the golf ball.

Instead of using a conventional flat impact surface, BFT incorporates an array of micro ball bearings directly into the putter face.

The rounded bearings create Radius's Ball-on-Ball Advantage — reducing the contact area between the putter face and the golf ball.

Why does that matter?

Golf balls aren't smooth. Their dimpled surface means the precise interaction between a conventional flat putter face and the ball can vary according to where the face meets the dimple pattern.

This is known as the Dimple Effect. Contact with the edge of a dimple can influence the ball's initial direction even when the putter itself has been delivered consistently.

BFT is engineered to reduce that interaction.

By creating a smaller, round-on-round contact area, the micro-bearing face reduces the amount of putter-face surface interacting with the ball and therefore reduces the opportunity for dimple-related deflection.

Radius's engineering comparison illustrates the principle with an estimated contact area of approximately 1,963 μm² for round-on-round contact compared with 7,850 μm² for round-on-flat contact, under the stated comparison assumptions.

Less contact. Less potential dimple interaction. More consistent contact.

Ball bearings are made to roll. So is your ball.

Stability from your hands to the head.

Vextor is fitted with a proprietary Radius Tour graphite putter shaft designed to complement the stability and balance characteristics of the Zero Torque head.

The shaft weighs 185g in its 46-inch raw specification and has just 1.7° of torque, creating a substantial, stable connection between the golfer's hands and the Vextor head.

Its heavyweight construction also plays an important role in the overall Vextor concept.

Rather than relying on progressively heavier putter heads as playing length increases, the substantial mass of the graphite shaft contributes to the overall weight and balance of the complete putter.

This allows Radius to retain the same 370g Vextor head across every playing length, preserving the head's fundamental Zero Torque geometry and weighting architecture from 33" through to 38".

Rather than treating the shaft simply as the connection between grip and head, Vextor makes it part of the complete performance system.

Radius Tour Graphite Shaft

SuperStroke Pistol 1.0

SuperStroke Tour 2.0XL

Every Vextor uses the same 370g head weight, from the traditional 33" configuration through to the 38" Counter Balance model.

That's deliberate.

Vextor's head isn't simply a weight attached to the end of a shaft. Its 370g mass, Forward CG weighting and Zero Torque geometry have been engineered as a complete system.

Rather than changing that fundamental head architecture for different playing lengths, Vextor uses its proprietary 185g heavyweight graphite shaft, together with purpose-matched SuperStroke grip configurations, to create the different setups.

The result is one consistent Vextor head platform across the entire range.

The head doesn't change. Your setup does.

Vextor's dramatic geometric mallet shape isn't simply about making a statement.

The open-frame construction allows mass to be positioned strategically throughout the head while creating a substantial and confidence-inspiring footprint behind the ball.

Precision machining, contrasting surfaces and exposed weighting reinforce the engineering behind the design, while the black finish keeps the overall appearance purposeful and focused at address.

The result is unmistakably modern.

A putter that looks as engineered as it feels.

A bold full-width contrasting alignment line runs through Vextor's centrally positioned shaft and across the upper surface of the head.

Together with the symmetrical geometry of the mallet, it creates a strong visual reference for orientating the putter behind the ball and establishing the intended starting line.

No complicated alignment system.

See the line. Set the face. Make the stroke.

ZERO TORQUE
Reduces the twisting forces that encourage unwanted face rotation.

FORWARD CG
Purposeful forward mass positioning works with Vextor's shaft-axis and CG architecture.

BALL FACE TECHNOLOGY
Micro-bearing face technology designed to reduce contact area and minimise unwanted dimple interaction.

185g GRAPHITE SHAFT
Proprietary heavyweight graphite construction with just 1.7° torque for a stable connection between golfer and head.

370g HEAD AT EVERY LENGTH
The fundamental Vextor head architecture remains consistent from 33" through to 38".

STANDARD + COUNTER BALANCE
Two purpose-built configurations using appropriate SuperStroke grip options.

CONTROL THE HEAD. CONTROL THE CONTACT.

Putting is difficult enough without introducing unnecessary variables.

Vextor approaches the problem from both sides of impact.

Zero Torque technology is designed to reduce unwanted rotation of the putter head.

Ball Face Technology is designed to reduce unwanted interaction between the putter face and the dimpled surface of the golf ball.

Between them sits a Forward CG architecture, proprietary heavyweight low-torque graphite shaft and purpose-matched SuperStroke setup.

And throughout the range, the same 370g Vextor head remains at the heart of the system.

One complete putting platform engineered around greater consistency.

SET THE FACE. TRUST THE STROKE. ROLL YOUR LINE.